Checking Compatibility

Checking Compatibility#

This document provides compatibility information for the software products offered by Mobilint. When configuring or updating the system, you must refer to the table below to ensure that compatible versions are used. Using incompatible combinations may result in unexpected behavior or system errors, and normal operation cannot be guaranteed.

Linux/Ubuntu#

Driver-Runtime-Firmware Compatibility#

Driver Ver.

Runtime Ver.

Firmware Ver.

1.0 ~ 1.10

0.28.0 ~ 0.30.1

1.1.1 ~ latest

1.11 ~ latest

1.0.0 ~ latest

1.1.1 ~ latest

Windows#

Driver-Runtime-Firmware Compatibility#

Driver Ver.

Runtime Ver.

Firmware Ver.

1.6.230

0.28.0 ~ 0.30.0

1.1.1 ~ latest

1.7.1 ~ 1.7.5

0.30.1 ~ 0.30.1

1.1.1 ~ latest

1.8.0 ~ latest

1.0.0 ~ latest

1.1.1 ~ latest

MXQ Compatibility Matrix#

To run a deep learning model optimized for Mobilint’s hardware (MXQ file extension), you must use a runtime that supports the specific MXQ format version on which the model is based.

This section provides a compatibility matrix of MXQ files for each runtime:

Runtime Ver.

MXQ Ver.

0.28.0 ~ 0.28.0

MXQv1 ~ MXQv5

0.29.0 ~ 0.30.1

MXQv1 ~ MXQv6

1.0.0 ~ latest

MXQv1 ~ MXQv7

How to check the version#

Runtime Library#

If you downloaded the runtime library from the official Download Center, the version information is typically available at the time of download.

Alternatively, you can print out version via runtime provided method :

// C++ Example
std::cout << mobilint::getQbRuntimeVersion() << "\n";

# Python Example
print(qbruntime.__version__)

Driver, Firmware#

You can check both driver and firmware versions using utility tool. For utility installation instructions, check installing utility.

  • Linux/Ubuntu

    • In Linux/Ubuntu environments, you can use utility mobilint-cli to check driver and firmware versions.

    • Run the following command:

      mobilint-cli status

    • Driver and firmware versions will appear in red box section of the output, as shown below.

    Version Check

  • Windows/Linux

    • In both Windows and Linux environments, you can check driver and firmware versions using the mobilint_ctrl(GUI) or mobilint_ctrl_cli(CLI) utilities.

    • After installing utilities according to installing utility, run the mobilint_ctrl or mobilint_ctrl_cli.

    mobilint_ctrl

    mobilint_ctrl_cli

MXQ#

Caution

Currently, MXQ version checking tool is available only for Linux/Ubuntu environments.

  • You can check MXQ version using mobilint-cli utility tool.

  • Run following command:

    mobilint-cli mxqtool show {mxq_path}

    Example output:

    $ mobilint-cli mxqtool show resnet50_IMAGENET1K_V1.mxq
Format Version:           0x60000
Compiler Version:         0.10.0.0
Hardware Version:         Aries2
...

  • The most significant digit of “Format Version” value indicates MXQ version. For example, “0x60000” corresponds to MXQv6.