Skip to content

Checking Compatibility

This document provides compatibility information for the software products offered by Mobilint. When configuring or updating the system, you must refer to the table below to ensure that compatible versions are used. Using incompatible combinations may result in unexpected behavior or system errors, and normal operation cannot be guaranteed.

Linux/Ubuntu

Driver-Runtime-Firmware Compatibility

Driver Ver. Runtime Ver. Firmware Ver.
1.0 ~ 1.10 0.28.0 ~ 0.30.1 1.1.1 ~ latest
1.11 ~ latest 1.0.0 ~ latest 1.1.1 ~ latest

Windows

Driver-Runtime-Firmware Compatibility

Driver Ver. Runtime Ver. Firmware Ver.
1.6.230 0.28.0 ~ 0.30.0 1.1.1 ~ latest
1.7.1 ~ 1.7.5 0.30.1 ~ 0.30.1 1.1.1 ~ latest
1.8.0 ~ latest 1.0.0 ~ latest 1.1.1 ~ latest

How to check the version

Runtime Library

If you downloaded the runtime library from the official Download Center, the version information is typically available at the time of download.

Alternatively, you can print out version via runtime provided method :

std::cout << mobilint::getQbRuntimeVersion() << "\n";
print(qbruntime.__version__)

Driver, Firmware

You can check both driver and firmware versions using utility tool. For utility installation instructions, see the Runtime manual.

  • Linux/Ubuntu

    • In Linux/Ubuntu environments, you can use utility mobilint-cli to check driver and firmware versions.

    • Run the following command:

      mobilint-cli status
      
    • Driver and firmware versions will appear in red box section of the output, as shown below.

    Version Check

  • Windows/Linux

    • In both Windows and Linux environments, you can check driver and firmware versions using the mobilint_ctrl(GUI) or mobilint_ctrl_cli(CLI) utilities.

    • After installing utilities (described in the Runtime manual), run the mobilint_ctrl or mobilint_ctrl_cli.

    mobilint_ctrl

    mobilint_ctrl_cli