# Checking Compatibility

This document provides compatibility information for the software products offered by Mobilint. When configuring or updating the system, you must refer to the table below to ensure that compatible versions are used. Using incompatible combinations may result in unexpected behavior or system errors, and normal operation cannot be guaranteed.

<style>
table.table {
  table-layout: fixed;
  width: 100%;
}
</style>

## Linux/Ubuntu

### Driver-Runtime-Firmware Compatibility

| Driver Ver.   | Runtime Ver.    | Firmware Ver.  |
| ------------- | --------------- | -------------- |
| 1.0 ~ 1.10    | 0.28.0 ~ 0.30.1 | 1.1.1 ~ latest |
| 1.11 ~ latest | 1.0.0 ~ latest  | 1.1.1 ~ latest |

## Windows

### Driver-Runtime-Firmware Compatibility

| Driver Ver.    | Runtime Ver.    | Firmware Ver.  |
| -------------- | --------------- | -------------- |
| 1.6.230        | 0.28.0 ~ 0.30.0 | 1.1.1 ~ latest |
| 1.7.1 ~ 1.7.5  | 0.30.1 ~ 0.30.1 | 1.1.1 ~ latest |
| 1.8.0 ~ latest | 1.0.0  ~ latest | 1.1.1 ~ latest |

## How to check the version

### Runtime Library

If you downloaded the runtime library from the [official Download Center](http://dl.mobilint.com), the version information is typically available at the time of download.

Alternatively, you can print out version via runtime provided method :

```cpp
std::cout << mobilint::getQbRuntimeVersion() << "\n";
```

```python
print(qbruntime.__version__)
```

### Driver, Firmware

You can check both driver and firmware versions using utility tool. For utility installation instructions, see the **Runtime** manual.

- Linux/Ubuntu

  - In Linux/Ubuntu environments, you can use utility `mobilint-cli` to check driver and firmware versions.

  - Run the following command:

    ```bash
    mobilint-cli status
    ```

  - Driver and firmware versions will appear in red box section of the output, as shown below.

  ![Version Check](../res/image/status_ver_check.png)

- Windows/Linux

  - In both Windows and Linux environments, you can check driver and firmware versions using the `mobilint_ctrl`(GUI) or `mobilint_ctrl_cli`(CLI) utilities.

  - After installing utilities (described in the **Runtime** manual), run the `mobilint_ctrl` or `mobilint_ctrl_cli`.

  ![mobilint_ctrl](../res/image/mobilint_ctrl.png)

  ![mobilint_ctrl_cli](../res/image/mobilint_ctrl_cli.png)